Schweitzer Engineering Laboratories SEL-734 - Installing the Computer Software

3.2
SEL-734 Meter Instruction Manual Date Code 20090730
PC Software
Installation
Installation
To install ACSELERATOR QuickSet, perform the following steps.
Step 1. Close all other software applications on the PC.
Step 2. Insert the
ACSELERATOR QuickSet SEL-5030 software CD
into the PC CD-ROM drive. The installation program should
start automatically. If the installation program does not start,
select Run from the Windows Start menu and type the
following command: D:\SETUP (substitute D:\ with the PC
CD-ROM drive letter).
Step 3. Follow the steps that appear on the screen. The installation
program will perform all the necessary steps to load
ACSELERATOR QuickSet onto the PC.
Starting ACSELERATOR QuickSet
You can start ACSELERATOR QuickSet in the following ways:
Step 1. Double-click the
ACSELERATOR QuickSet icon if you have a
desktop shortcut.
Step 2. Choose Programs > SEL Applications and select the
ACSELERATOR QuickSet icon to start the program.
Courtesy of NationalSwitchgear.com