Date Code 20090730 Instruction Manual SEL-734 Meter
SEL-734 Meter Command Summary
Access Level Command Description
0 ACC Move to Access Level 1
0 BNA Binary names
0 CAS Compressed ASCII data configuration
0 DNA Compressed names
0 EXI Terminate a Telnet session. Only available when connected via Telnet.
0 ID Compressed ASCII Fast Meter ID
0 SNS Compressed SER settings
1 2AC Move to Access Level 2
1 CEV Compressed event report, 16 samples per cycle
1 CEV R Compressed event report, 1 or 8 kHz
1 CEV L Compressed event report, 1 or 8 kHz
1 CTR Comtrade format event
1 COM Display M
IRRORED BITS channel statistics
1 COM C Reset M
IRRORED BITS channel statistics
1 COU Display SEL
OGIC counters
1 CHI Compressed history
1 CST Compressed status
1 DAT Show date
1 DNP Show DNP map
1 EAC Move to Energy Access Level
1 EVE Event report, 16 samples per cycle
1 EVE C Compressed event report, 16 samples per cycle
1 EVE L Event report, 1 or 8 kHz
1 EVE L C Compressed event report, 1 or 8 kHz
1 EVE R Event report, 1 or 8 kHz
1 EVE R C Compressed event report, 1 or 8 kHz
1 FIL DIR List settings file directory
1 FIL READ Transfer settings file from meter
1 HIS Summary event reports
1 LDP Display report for first load profile recorder
1 LDP2
–LDP12 Display report for second through twelfth load profile recorder
1 MAT Displays results of SEL
OGIC math variable equations
1 MET Display instantaneous metering data
1 MET CF Display crest factor metering
1 MET D Display demand metering data
1 MET D T Display peak demand times
1 MET E Display energy metering data
1 MET FL Display flicker metering quantities
Courtesy of NationalSwitchgear.com
To Next Page
Loading...