4.33
Date Code 20090730 Instruction Manual SEL-734 Meter
Metering
Load Profile Report
The starting and stopping daylight saving strings are defined as follows:
Nonrepeating (i.e., April 13th 2008)
"Nyyyymmdd-" where
yyyy = 4-digit year,
mm = 2-digit month,
dd = 2-digit day,
“-” (ASCII 0x2d) is the pad
Specific date repeating (i.e., the 1st of every April)
"Smmdde----" where
mm = 2-digit month,
dd = 2-digit day,
e = weekend behavior, upper 4 bits for Sunday, lower 4 bits
for Saturday
0 = Allow weekend day
1 = Move weekend day forward one day
2 = Move weekend day forward two days
3 = Move weekend day backward one day
4 = Move weekend day backward two days
“-” (ASCII 0x2D) is the pad
Occurrence
"xOyw-mm---" (i.e., occurs on the first Sunday of every April) where
x = “I” for inclusive, “-” for noninclusive
y = “F” for first, “L” for last
w = day of week (1–7),
mm = 2-digit month
“-” (ASCII 0x2D) is the pad
“xOOwomm---” (i.e., occurs on the third Sunday of every April) where
x = “I” for inclusive, “-” for noninclusive,
w = day of week (1–7),
o = occurrence number (1–5),
mm = 2-digit month
“_” (ASCII 0x2D) is the pad
“xOWwomm---” (i.e., occurs on Sunday of the fourth week of April)
where
x = “I” for inclusive, “-” for noninclusive,
w = day of week (1–7),
o = week number (1–6),
mm = 2-digit month
“_” (ASCII 0x2D) is the pad
Following (i.e., every Sunday following April 2nd)
“xFwmmdd---” where
x = “I” for inclusive, “-” for noninclusive,
w = day of week (1–7),
mm = 2-digit month
dd = 2-digit day
“_” (ASCII 0x2D) is the pad
Courtesy of NationalSwitchgear.com
To Next Page
Loading...
