SICK microScan3 User Manual

Version number Amendments and new functions
1.2.0
•
N
ew rights management using user group Administrator (now 4
user groups)
•
Additional third option for resetting to factory settings
•
Modified process for resetting the password
•
Deviating multiple sampling after object detection can be con‐
figured
•
Interfaces and selected functions can be activated or deacti‐
vated
•
New Always ON (NON-safe) function in monitoring case tables
Table 32: Functional scope of the microScan3 Core – PROFINET (M12)
Version number Amendments and new functions
1.0.0
•
F
irst released version, including the following functions:
°
Option to adjust the settings for multiple sampling after
switching between monitoring cases
°
Data output via UDP and TCP/IP (measurement data, field
interruption, application data, process information)
°
Time synchronization via SNTP
1.1.0
•
P
ROFINET process image (non-safety-related)
1.2.0
•
New rights management using user group Administrator (now 4
user groups)
•
Additional third option for resetting to factory settings
•
Modified process for resetting the password
•
Deviating multiple sampling after object detection can be con‐
figured
•
Interfaces and selected functions can be activated or deacti‐
vated
•
New Always ON (NON-safe) function in monitoring case tables
Table 33: Functional scope of the microScan3 Pro – PROFINET (RJ45)
Version number Amendments and new functions
1.0.0
•
F
irst released version, including the following functions:
°
Option to adjust the settings for multiple sampling after
switching between monitoring cases
°
Data output via UDP and TCP/IP (measurement data, field
interruption, application data, process information)
°
Time synchronization via SNTP
1.1.0
•
P
ROFINET process image (non-safety-related)
1.2.0
•
New rights management using user group Administrator (now 4
user groups)
•
Additional third option for resetting to factory settings
•
Modified process for resetting the password
•
Deviating multiple sampling after object detection can be con‐
figured
•
Collision protection field (devices with max. protective field
range 9 m)
•
Interfaces and selected functions can be activated or deacti‐
vated
•
Up to 4 simultaneous monitoring case tables
•
New Always ON (NON-safe) function in monitoring case tables
TECHNICAL DATA 13
8021219/1ELL/2022-01-21 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 – PROFINET
163
Subject to change without notice

SICK microScan3 Specifications

General

Scanning angle	275°
Power supply	24 V DC
Supply voltage	24 V DC ± 20%
Enclosure rating	IP65
Resolution	70 mm
Protective field range	5.5 m
Number of fields	128
Interface	Ethernet
Safety integrity level	SIL3
Performance level	PL e
Ambient temperature	+50°C
Scanning range	5.5 m