Siemens Hipath 5000 Service Documentation

System Data Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
2-60 HiPath 3000/5000 V9, Service documentation
sysdat.fm
Dynamic Configuration Rules
Special Devices
Trunk Interfaces
Table 2-37 Points for Special Devices
System Interface Meaning Weight
UCD Agent
(HPCC, OSCC)
Number of active UCD agents
1
controlled by the OSCC
application.
1 The associated devices must no longer be considered separately; the same applies to the incoming trunks provided for
the ACD group (at least one B channel per agent)
59 · C
ACD Agent
(e.g., HPCO)
Number of active ACD agents, where the display of each
agent is refreshed every T seconds.
179 / T +
65 · C
ACD group Number of ACD groups. 4.8
AC Number of active attendant consoles 252 · F
VPL
Automatic AC
(IVM)
Number of analog trunks or digital B channels which are
routed from CO to the automatic attendant at IVM.
21.9 · F
Ltg
Table 2-38 Points for Trunks
System Interface Meaning Weight
Trunk Number of analog trunks or digital B channels to CO 24.6 · F
Ltg
ITSP trunks Possible number of simultaneous voice channels to the
ITSPs
23.9 · F
Ltg
Networking trunk
(TDM CorNet-N)
Number of digital B channels to other nodes or to Xpres-
sions via TDM with CorNet-N
23.4 · F
Ltg
Networking trunk
(TDM CorNet-NQ)
Number of digital B channels to other nodes or to Xpres-
sions via TDM with CorNet-NQ
27.1 · F
Ltg
Networking trunk
(IP)
Number of digital B channels to other nodes or to Xpres-
sions via IP
Note: HG 1500 performance must be considered sepa-
rately.
23.9 · F
Ltg

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English