To Next Page

To Previous Page

Service Nur für den internen Gebrauch

A31003-H3590-S100-7-7620, 06/2012

12-6 HiPath 3000/5000 V9, Service documentation

service.fm

System Administration Options

12.1.4 Remote administration

You can administer multiple HiPath 3000/5000 systems from a central service center via PPP

(point-to-point protocol). Each HiPath 3000/5000 is addressed via its PSTN (public switching

telephone network) interface.

You must enter a router call number (DID number) for every PSTN interface in the service cen-

ter for external access to HiPath 3000/5000. This call number is not the number previously used

for administration via integrated digital modem (B channel) or integrated analog modem (IMO-

DN).

You can establish a connection between the service center and HiPath 3000/5000 using either

the integrated digital modem (B channel) or the integrated analog modem (IMODN). Data is ex-

changed in both cases using Point-to-Point-Protocols (PPP).

If the connection is established via callback, HiPath 3000/5000 first of all denies a connection

request from the service center (HiPath 3000/5000 Manager E). A callback is then set up to the

service center’s calling party number transferred via the PSTN connection’s D channel.

SIRA Environment

In a SIRA (Secured Infrastructure for Remote Access) environment, HiPath 3000 can be mon-

itored and administered via a secure connection. Among other things, virtual terminal servers,

specific service applications (e.g., HiPath 3000/5000 Manager E), and database servers are

part of a SIRA environment.

HiPath 3000/5000 Manager E offers a CAPI interface (Common ISDN Application Program-

ming Interface) for remote administration via ISDN. In a SIRA environment, HiPath 3000/5000

Manager E runs on a Windows terminal server and can establish connections to multiple spec-

ified controllers (Bintec

routers) via the ISDN interface (“Remote Multi-CAPI” feature). If the

callback function is active in HiPath 3000/5000, a callback to the defined controller in the ser-

vice center on the second B channel to the ISDN multiple subscriber number is performed after

the connection request has been rejected.

Siemens Hipath 5000 Service Documentation

Other manuals for Siemens Hipath 5000