Siemens Hipath 5000 Service Documentation

inform.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
1-5
Nur für den internen Gebrauch Introduction and Important Notes
About this Documentation
Appendix A, “System Program-
ming Codes (Expert Mode
Codes)”
These appendices contain lists with programming codes, IP
protocols, port numbers.
Appendix B, “Codes for Activat-
ing/Deactivating Features”
Appendix C, “IP Protocols and
Port Numbers Used with HiPath
3000/5000 V7 and Higher”
Appendix D, “Identifying System
Power Requirements”
This supplement provides information on the power require-
ment of the boards and components of the HiPath 3000 sys-
tems.
Appendix E, “Notes for Editing
the File snmpd.cnf”
This appendix is aimed at users with sufficient SNMP knowl-
edge to modify trap destinations and community names in
HiPath Fault Management Desktop.
Appendix F, “Country Versions” This appendix specifies the countries with a separate coun-
try code and the countries with the country code “IM” that
can be set in Manager E for configuring HiPath 3000/5000.
Chapter Description

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English