wclient.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
10-133
Nur für den internen Gebrauch Workpoint Clients
Mobile Telephones for HiPath Cordless Office
10.13.4 Logging Mobile Telephones on to the System
Introduction
Sixteen mobile telephones are released for use by entering the HiPath cordless system number
(DECT identification, eight hexadecimal places) and inserting the SLC16N in HiPath 3550, after
which they can be logged on (mobile telephone codes, or PINs, are assigned. Other mobile
telephones must be released before they can be used.
Before logging on a mobile phone, you must open the login window from a system telephone
(Assistant T) by entering the code and password. A maximum of 10 login windows can be open
at a time.
Then type the station numbers of the mobile telephones you want to log on.
10.13.4.1 Opening the HiPath 3000 Login Window
The login window remains open for ten minutes per station. The handset must log on during
this period (refer to Page 10-134).
>
For initial installation of the HiPath Cordless Office, the HiPath cordless system num-
ber must be ordered together with the SLC16N board. Replacement boards are al-
ways delivered without a HiPath cordless system number.
Input Activity Display
*94 2 19970707 Open the login window Number:
124 Type the station number of the handset you
want to log on (such as, 124)
Number:
125 Type the station number of the second handset
you want to log on (such as, 125)
Number:
:
:
:
:
:
:
To Next Page
Loading...
Need help?
General