inform.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
1-13
Nur für den internen Gebrauch Introduction and Important Notes
safety information and warnings
– Only use grounded soldering irons.
● Use only original accessories. Failure to observe these instructions may damage the
equipment or even violate safety and EMC regulations.
● Before starting wall mounting, check that the wall has sufficient bearing strength. Always
use suitable installation and mounting materials to mount the communication systems and
devices securely.
● Condensation damage:
A sudden temperature change may cause condensation to form. If the communication sys-
tem or device is, for example, moved from a cold environment to a warmer space, conden-
sation may form. Wait until the temperature has regulated and the communication system
or device is completely dry before switching it on.
To Next Page
Loading...
Need help?
General