Siemens Hipath 5000 Service Documentation

wclient.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
10-123
Nur für den internen Gebrauch Workpoint Clients
Attendant Console Versions
10.12 Attendant Console Versions
10.12.1 OpenStage Attendant
Switching services
Switching services can be executed in HiPath 3000/5000 by a specially configured OpenStage
telephone. This OpenStage Attendant is also an intercept position. It is the destination for all
incoming non-DID calls and calls which the call-allocation algorithms are unable to route to us-
ers (intercept calls). The attendant routes these calls to the correct destination.
Telephones
Configuration as an OpenStage Attendant is possible for the following telephones:
● OpenStage 30
● OpenStage 40
● OpenStage 60
● OpenStage 80
Key layout
On OpenStage 30/40/60/80 telephones configured as attendant consoles, the programmable
function keys are assigned as follows:
Figure 10-57 Standard key assignment (default) for OpenStage Attendant
Night service
External 1
External 2
OpenStage Attendant
*) not for OpenStage 40
*
*
Internal phonebook
Queued calls
Override
Hold

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English