Siemens Hipath 5000 Service Documentation

Workpoint Clients Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
10-106 HiPath 3000/5000 V9, Service documentation
wclient.fm
optiPoint 500
10.5.5 Maximum Configuration for U
P0/E
Workpoint Clients, Add-On
Devices and Adapters
Table 10-9 System-Specific Maximum Configuration for U
P0/E
Workpoint Clients, Add-On
Devices and Adapters
Workpoint Clients, Add-On Devic-
es, Adapters
SYSTEM
HiPath
3800
1
1 System load is greatly dependent on factors such as system configuration and traffic. Static rules on configuration inspec-
tion are therefore not suitable. As a guide, configurations that include UCD/ACD, more than one SLC16N, groups with
more than 10 stations or OpenScape Office connections should always be inspected using the project planning tool (https:/
/enterprise-businessarea.siemens-enterprise.com/productinfo/document/9fTFkWdA76U_/Hi-
Path%203000%20V8%20Planungsanleitung%20Performance%20Calculation%20Tool.xls).
HiPath
3550
HiPath
3500
HiPath
3350
HiPath
3300
optiPoint 500 telephones
● Number per system 384 72
2
28xU
P0/E
at the central board + 5xSLU8 + 1xSLMO24.
48
3
38xU
P0/E
at the central board + 5xSLU8R.
24
4
48xU
P0/E
at the central board + 2xSLU8.
24
5
58xU
P0/E
at the central board + 2xSLU8R.
● Number per box (the value in
brackets applies to operation us-
ing a PSUI)
192 – – – –
optiPoint acoustic adapters
Number per system No restriction
optiPoint analog adapters
Number per system 116 24
6
6 If the total number of U
P0/E
stations, analog stations and additional stations connected using an adapter is greater than
72, a Powerbox PB3000 must be used as an external power supply unit.
24
6
8
7
7 If the total number of U
P0/E
stations and additional stations connected using an adapter is greater than 24, a UPSC-D/
UPSC-DR must be used.
8
7
optiPoint recorder adapters
Number per system No restriction
optiPoint ISDN adapters
Number per system 116 48
6
48
6
8
7
8
7
optiPoint phone adapters
Number per system 116 48
6
48
6
24
7
24
7
optiPoint key modules
Number per system 250 100 100 30 30
optiPoint BLF:
Number per system 12 6 6 – –

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English