start_h5.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
6-47
Nur für den internen Gebrauch Startup and Administration HiPath 5000
Perform HiPath 5000 Basic Configuration
6.10 Perform HiPath 5000 Basic Configuration
A distinction should be drawn between the basic configuration of a
● HiPath 5000 RSM as central administration unit in an IP network
By creating a “Single System Image”, all relevant nodes can be centrally administered.
The IP network is administered via the Feature server. The HiPath 3000/5000 Manager E
administration tool does not communicate with the individual nodes but exchanges data
with the Feature server. The Feature server ensures that the networked nodes receive syn-
chronized CDB data. The Feature Server is an MS Windows service that automatically
starts at the same time as the HiPath 5000 RSM.
HG 1500 boards are still administered on a board-specific basis using Web-based man-
agement (WBM).
The administration of IP networking with HiPath 3000/5000 Manager E is divided into the
following steps:
a) Configuring the individual nodes belonging to the network = Configuration of the indi-
vidual customer databases.
b) Configuring the Feature server = Create an empty server net file.
c) Start data transfer = registration of the individual nodes and transfer of the node data
to the server net file.
d) Transfer the central database for IP networking = Load the server net file to the Feature
server. The customer database is then automatically distributed to the various nodes.
Future administrative node work is then performed by the server.
To Next Page
Loading...
Need help?
General