wclient.fm
A31003-H3590-S100-7-7620, 06/2012
HiPath 3000/5000 V9, Service documentation
10-75
Nur für den internen Gebrauch Workpoint Clients
Central Administration of IP Workpoints via the System
10.3 Central Administration of IP Workpoints via the System
In combination with HiPath Xpressions Compact, HiPath 3000 V6.0 or later supports the central
administration of IP workpoints connected to the system. A deployment tool (DLS interface DLI)
was implemented on the following HiPath Xpressions Compact boards for this. The DHCP and
FTP servers integrated in DLI support the following:
● the central configuration of parameters for all IP workpoints connected enabling plug&play
operation.
● the central software update of all IP workpoints connected.
Prerequisites
● HiPath 3000 V6.0 or later
The following systems support the DLI function:
– HiPath 3800, with the HiPath Xpressions Compact board IVMNL and the HG 1500
board STMI2
– HiPath 3550, with the HiPath Xpressions Compact board IVMS8N or IVMP4 and the
HG 1500 board HXGS3
– HiPath 3500, with the HiPath Xpressions Compact board IVMS8NR or IVMP4N and
the HG 1500 board HXGR3
● HiPath Xpressions Compact, V2.5 and later
● HG 1500, from V3.0 or later
● IP workpoints
Central administration can be performed for the following IP workpoints over the DLI func-
tion:
– OpenStage 20 (HFA), from V1 R0.1.41
– OpenStage 40 (HFA), V1 R0.1.41 or later
– OpenStage 60 (HFA), V1 R0.1.41 or later
– OpenStage 80 (HFA), V1 R0.1.41 or later
– OpenScape Personal Edition
– optiPoint 410 entry V5.0 and later
>
The DLI function can only be used for standalone systems.
The Deployment and Licensing service is available for networked HiPath 3000
systems with or without HiPath 5000 RSM. For information on how to use this
tool, see the Deployment Service Administrator Manual.
To Next Page
Loading...
Need help?
General