Siemens Hipath 5000 Service Documentation

Contents Nur für den internen Gebrauch
A31003-H3590-S100-7-7620, 06/2012
0-6 HiPath 3000/5000 V9, Service documentation
hp3hp5shTOC.fm
4.1.4.3.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-24
4.1.4.3.2 Mounting a System Cabinet using Support and Angle Brackets. . . . . . . 4-24
4.1.4.4 Grounding the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27
4.1.4.5 Checking the Grounding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30
4.1.5 Installing Boards (Configuration Notes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
4.1.5.1 System factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
4.1.5.2 Board Slots in the Basic and Expansion Cabinet . . . . . . . . . . . . . . . . . . . . . 4-31
4.1.5.3 Inserting or Removing Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-34
4.1.5.4 Mounting Connector Panels (if required) . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-40
4.1.5.5 Installing the SIVAPAC-SIPAC Board Adapter . . . . . . . . . . . . . . . . . . . . . . . 4-42
4.1.5.6 Initializing the Boards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-45
4.1.5.7 Distribution of the PCM Highway . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-46
4.1.5.8 Static Traffic Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-50
4.1.6 Connecting the Cable to the Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-51
4.1.6.1 Backplane of the Basic Cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-52
4.1.6.2 Expansion Cabinet Backplane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-55
4.1.6.3 Connecting Cables Between the Basic and Expansion Cabinet . . . . . . . . . . 4-57
4.1.6.4 Connecting Peripherals to the SIVAPAC Connector on the Backplane . . . . 4-58
4.1.6.5 Connecting Peripherals to the Connector Panels with RJ45 Jacks . . . . . . . 4-61
4.1.6.6 Connecting Peripherals to the Connector Panels
with CHAMP Jack (for U.S. only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-63
4.1.6.7 Connecting Peripherals to Connector Panels with SIPAC 1 SU Connectors 4-64
4.1.7 Using an External Main Distribution Frame or External Patch Panel . . . . . . . . . . 4-66
4.1.7.1 Using an External Main Distribution Frame MDFU-E S30805-U5283-X . . . . 4-67
4.1.7.1.1 Mounting the Main Distribution Frame (MDFU-E). . . . . . . . . . . . . . . . . . 4-68
4.1.7.1.2 Laying the Line Network and Jumpers on the MDFU-E . . . . . . . . . . . . . 4-68
4.1.7.2 Inserting the External Patch Panel S30807K6143-X . . . . . . . . . . . . . . . . . . 4-72
4.1.7.2.1 Installing the Patch Panel in a 19-Inch Cabinet. . . . . . . . . . . . . . . . . . . . 4-73
4.1.7.2.2 Connecting the Line Network to the External Patch Panel . . . . . . . . . . . 4-74
4.1.7.3 Inserting External S
0
Patch Panel C39104-Z7001-B3 . . . . . . . . . . . . . . . . . 4-76
4.1.7.3.1 Installing the S
0
Patch Panel in the 19-Inch Cabinet . . . . . . . . . . . . . . . 4-77
4.1.7.3.2 Connecting Lines to the External S
0
Patch Panel. . . . . . . . . . . . . . . . . . 4-78
4.1.7.4 For U.S. only: Connecting Network Facilities. . . . . . . . . . . . . . . . . . . . . . . . . 4-80
4.1.8 Loading the System Software and Installing Subboards on the CBSAP . . . . . . . 4-81
4.1.9 Connecting Workpoint Clients . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-82
4.1.10 Making Trunk and Networking Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-82
4.1.11 Performing a Visual Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-83
4.2 Installing HiPath 3550, HiPath 3350, HiPath 3500, and HiPath 3300. . . . . . . . . . . . . 4-85
4.2.1 Installation Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-85
4.2.2 Installation Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-86
4.2.3 Installing HiPath 3550 and HiPath 3350. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87
4.2.3.1 Selecting the Installation Site. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-87
4.2.3.1.1 For U.S. only: Power plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-89
4.2.3.2 Unpacking the Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-90
4.2.3.3 Not for U.S.: Mounting the Main Distribution Frame (HiPath 3550 only) . . . . 4-90

Siemens Hipath 5000 Specifications

General

Brand	Siemens
Model	Hipath 5000
Category	Telephone
Language	English