Siemens SINUMERIK 840D Simodrive 611 digital

6 Pro
g
rammin
g
the control
6
03/2006
6.10 Linear motors (1FN1 and 1FN3 motors)
6-133
 Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
3. Select the motor
Message 300701: “Start-up required” must appear before the motor is selec-
ted (Fig. 6-26).
a) Is the linear motor included in the list of linear motors?
If yes: Select the motor
(parallel-connected linear motors start with 2x1FN. ...)
Fig. 6-26 Selecting a motor for which the data is already listed