10
03/2006
10.7 Trace function
10-208
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D/810D Start-Up Guide (IADC) – 03/2006 Edition
In the Bit selection part of the screen, select the relevant bit identifier from the
drop-down menu for each of the traces, the signals from which are to be trans-
ferred to the trace mix and, in the “Track selection:” input box, enter the desired
track from the trace mix or select it from the drop-down list.
The selected signal no longer belongs to the trace mix.
All assignments of signals to tracks in the trace mix are deleted.
Used to exit the screen without transferring the changes to the
HMI_ADV\IBSVTSI.INI file.
The current assignment is transferred to the HMI_ADV\IBSVTSI.INI file and is
suggested again the next time the trace mix is selected.
Delete
track soft key
Delete
all soft key
Cancel soft key
Accept soft key
10 Drive O
timization
To Next Page
Loading...
