Siemens siprotec 7SA6 User Manual

Control During Operation
7-377SA6 Manual
C53000-G1176-C133-1
Figure 7-35 Switching setting groups from the front panel
Control of the setting groups can always be regained by switching to one of the groups
A through D provided that you know the required password.
The key can be used to return to the 6(77,1*6 sub-menu; the key can be
pressed to returns to the 0$,10(18.
From PC with
DIGSI
®
4
By opening the 2QOLQH directory with a double click in DIGSI
®
4, the operating
functions for the device appear in the left part of the window. See Figure 7-36.
Figure 7-36 Function selection window in DIGSI
®
4 – example
Double click on 6HWWLQJV to find &KDQJH *URXS LQWKHGDWDZLQGRZ(Figure
7-36 right).
&+$1*(*5283

$&7,9(*5283
*URXS$
The currently-active setting group is
displayed under Address .
The setting group can be changed under
Address : by pressing the key, after
entering the password, two possible
alternatives are displayed in a new window
each time:
Using the keys, select one of the
alternatives and confirm with the key;
The next question (“$UH\RXVXUH"”) is
answered with <HV and the selected
alternative is confirmed, or is answered with
1R using the key and the change is
cancelled with the key.
ENTER
ENTER
ENTER
$UH\RXVXUH"
<HV1R
ENTER
&+$1*(WR
!*URXS$
!*URXS$
*URXS%
*URXS&
*URXS'
YLD%LQDU\,QSXW
YLD3URWRFRO
MENU
:

Siemens siprotec 7SA6 Specifications

General

Brand	Siemens
Model	siprotec 7SA6
Category	Relays
Language	English