Sirona DAC UNIVERSAL - Page 135

60 53 362 D3472
D3472.201.10.20.02 07.2016
135
Sirona Dental A/S 6Cleaning and maintanance DAC UNIVERSAL ADVANCED
Operating Instructions DAC UNIVERSAL 6.10Cleaning the empty chamber of the DAC UNIVERSAL ADVANCED
båÖäáëÜ
3. Place a NitraClean tablet in the empty chamber. See "Functions with
the BASKET lid [ → 22]" for more information on using a NitraClean
tablet.
 If the standard program (134°C/3 min) is already selected, jump
to nr. 7 below.
4. Enter the "program selection“ menu section.
5. Press the “Down”-Key to confirm the selection hereby selecting the
standard program.
6. Return to the ready screen.
7. Make sure the STANDARD lid is selected otherwise use the “Up/
Down”-Keys accordingly on the ready screen, to select the
STANDARD lid.
8. Press the “Start/Stop“-Key to start the cycle.
 A prompt to press down on the safety ring appears on the display.
9. Press down on the safety ring to start the cycle. If the safety ring is
not pressed within 20 seconds, you must choose the lid and press the
"Start/Stop"-Key again.
 The STANDARD lid of the DAC UNIVERSAL closes as soon as
the safety ring is pressed.
 The DAC UNIVERSAL automatically runs the cleaning and
sterilization cycle.
 The display shows at any time which phase the DAC
UNIVERSAL is in, see section "Display information DAC
UNIVERSAL ADVANCED [ → 71]“.
 When the selected cycle is completed the display will indicate as
seen on the picture. The lid moves about halfway out of the
chamber.
10. Press the “Down”-Key.
 The STANDARD lid will open completely.
NOTICE
No instruments may be on the STANDARD lid.
NOTICE
Make sure that the lid is inserted all the way into the holder.
NOTICE
Make sure there are no objects in the chamber.
CAUTION
Danger of burning!
Never hold your head directly over the DAC UNIVERSAL when it opens
and do not hold the lid firmly, as steam comes out of the unit when it
opens.