Sirona DAC UNIVERSAL - Page 34

60 53 362 D3472
34 D3472.201.10.20.02 07.2016
3Product description Sirona Dental A/S
3.3Programs and program selection Operating Instructions DAC UNIVERSAL
Select DAC U. ADVANCED lid
Program for STANDARD lid One of the 3 programs listed above can be selected from the menu.
If nothing is selected, the standard program is used.
Program for BASKET lid One of the 3 programs listed above can be selected from the menu.
If nothing is selected, the standard program is used.
Program for WRAPPED lid Only the standard program is available. The total length of the cycle in the
"Wrapped" program is approx. 20 minutes.
Programs FLEX lid
Program for FLEX lid One of the 3 programs listed above can be selected from the menu. If
nothing is selected, the standard program is used.
Block/unblock individual programs It is possible to block programs that are not used. Please contact your
authorized dealer to block/unblock programs.
IMPORTANT
When using the DAC UNIVERSAL ADVANCED, be sure to select the
correct lid type.
IMPORTANT
When using the DAC UNIVERSAL STANDARD, select the lid type when
beginning a cycle. Refer to section "Reprocessing with DAC
UNIVERSAL STANDARD [ → 171]“ for further instructions.
IMPORTANT
When using the DAC UNIVERSAL STANDARD it is imperative that the
"Lubricate"-Key is pressed to turn off the automatic oil treatment.
IMPORTANT
When using the DAC UNIVERSAL STANDARD it is imperative that the
"Wrapped"-Key is pressed to turn off the automatic rinse and oil
treatment.
IMPORTANT
When using the DAC UNIVERSAL STANDARD it is imperative that the
"Lubricate"-Key is pressed to turn off the automatic oil treatment.