Page 175 of 292
Note: Without the flow sensor connected the
user will only be able to set the “Triggered
breath level set to” percentage.
Note: If TTV is ON the termination sensitivity and provide support values for
non SIMV breaths will only come into effect if the targeted tidal volume
could not be reached.
16.7.2 Ventilation Without a Flow Sensor Connected.
When the ventilator is used without the flow sensor connected, the user will have
to set the Breath Trigger Sensitivity and the Cycle Fail Alarm.
Flow based functions, waveforms and loops will not be displayed.
TTV will not be available.
Refer to chapter "15.2 Breath Trigger Sensitivity (Pressure Triggering)" on page
151 for more information.
To Next Page
Loading...
