HRX-OM-X037
Chapter 5 Display and Setting of Various Functions
HRL Series 5.4 Description of the Screen
Table 5.4-30 Signal type for contact output signal 4 to 6
No. Indication Item Contact type Explanation
the time of alarm : closed
the time of alarm : closed
the time of alarm : closed
Maintenance reminders occurred : closed
Maintenance reminders occurred : open
TEMP READY status : closed
TEMP READY status : closed
TEMP READY status : closed
11 EXTERNAL TEMP None － －
Output the input signal as it is
Reverse output of the input signal
Output the input signal as it is
Reverse output of the input signal
Reverse output of the input signal
Selected alarm occurrence : closed
Selected alarm occurrence : open
Operation stop "FLT" alarm
status signal
Continuing operation “WRN”
alarm status signal
maintenance reminder
status signal
Startup setting
status signal
Selected maintenance
reminders occurred : closed
About selectable maintenance reminders
Refer to "Table 5.4-32 List of maintenance reminders".
Output the input signal as it is
Selected alarm status signal
Refer to "Table 5.4-31 List of alarm selection" for selectable alarms.
Mode request input signal(DIO)
(Pass through signal of the
contact input signal 3)
Selected maintenance
reminders occurred : open
Maintenance reminders
status signal
Anti-freezing setting
status signal
Warming up setting
status signal
Pass through signal of the
contact input signal 1
Pass through signal of the
contact input signal 2
To Next Page
Loading...
Need help?
General
