SMC Networks HRL100-A 40 Series User Manual

HRX-OM-X037
Chapter 4 Starting the Product
HRL Series 4.1 Before Starting
4-1
Chapter 4 Starting the Product
4.1 Before Starting
Check the following points before starting the product.
 Installation state
 Check that the product is installed horizontally.
 Check that there are no heavy objects on the product, and the external piping
is not applying excessive force to the product.
 Connection of the cables
 Check that the power, ground and I/O signal cables (to be supplied by user)
are correctly connected.
 Circulating fluid piping
 Check that the circulating fluid piping is correctly connected to the inlet and
outlet.
 Fluid level gauge
 Confirm that the fluid level is between “HIGH” and “LOW” levels of the fluid
level gauge.
Only people who have sufficient knowledge and experience about the
product and its accessories are allowed to start and stop the product.

SMC Networks HRL100-A 40 Series Specifications

General

Brand	SMC Networks
Model	HRL100-A 40 Series
Category	Chiller
Language	English