SMC Networks HRL100-A 40 Series User Manual

HRX-OM-X037
Chapter 7 Alarm Notifications and Troubleshooting
7.3 Troubleshooting HRL Series
7-2
7.3 Troubleshooting
7.3.1 Alarm contents, causes, and troubleshooting
Troubleshooting method varies depending on which alarm has been
generated. Refer to “Table 7.3-1 and 7.3-2 Alarm codes and
troubleshooting”.
Instructions to reset the alarms after eliminating the causes of the alarms
explained below.
 Check the alarm contents displayed on the "Information" screen
and remove the cause. Alarms can not be canceled except this
screen.
The alarm can be reset by serial communication.
Refer to the Operation Manual Communication Function for more
details.
 [ ]Press the button
 The alarm is reset.
Confirm that the alarm content on the "Information" screen has
disappeared. The alarm signal of contact output and serial
communication turns off.
Press
Alarm contents
The alarm
contents
disappear
Alarm cancellation method

SMC Networks HRL100-A 40 Series Specifications

General

Brand	SMC Networks
Model	HRL100-A 40 Series
Category	Chiller
Language	English