GW-9
GLASS/WINDOW/MIRROR
Power Window Control Switch
• RHD model
If NG, replace the main switch.
2. SUB-SWITCH
Measure the switch resistance.
If NG, replace the sub-switch.
Switch position Terminal No. Standard
Driver’s side
AUTO UP 12 and 7, 6 and 1 Less than 1 Ω
UP 12 and 7, 6 and 1 Less than 1 Ω
OFF
1 and 6
1 and 7
6 and 7
Less than 1 Ω
DOWN 12 and 6, 7 and 1 Less than 1 Ω
AUTO DOWN 12 and 6, 7 and 1 Less than 1 Ω
Front passenger’s side
UP 12 and 2, 3 and 1 Less than 1 Ω
OFF
1 and 2
1 and 3
2 and 3
Less than 1 Ω
DOWN 12 and 3, 2 and 1 Less than 1 Ω
Rear LH
UP 12 and 10, 9 and 1 Less than 1 Ω
OFF
1 and 9
1 and 10
9 and 10
Less than 1 Ω
DOWN 12 and 9, 10 and 1 Less than 1 Ω
Rear RH
UP 12 and 14, 13 and 1 Less than 1 Ω
OFF
1 and 13
1 and 14
13 and 14
Less than 1 Ω
DOWN 12 and 13, 14 and 1 Less than 1 Ω
Switch position Terminal No. Standard
Front passenger’s side
and rear
UP
8 and 5, 6 and 7, 1 and 8, 1 and
5
Less than 1 Ω
OFF 4 and 5, 6 and 7 Less than 1 Ω
DOWN
8 and 7, 4 and 5, 1 and 8, 1 and
7
Less than 1 Ω
To Next Page
Loading...
