EI-38
EXTERIOR/INTERIOR TRIM
Roof Rail
14.Roof Rail
A: REMOVAL
1) Remove the roof trim. <Ref. to EI-47, REMOVAL, Roof Trim.>
2) Remove the five mounting nuts.
3) Detach the clip at front edge sideways carefully to remove the roof rail upwards.
NOTE:
Remove the clip at “C” area upwards while applying sideway force to deflect hook at “a” area.
B: INSTALLATION
Install in the reverse order of removal.
CAUTION:
Be careful not to scratch the body panels with
roof rail stud bolts when removing and install-
ing them.
Tightening torque:
7.5 N·m (0.76 kgf-m, 5.53 ft-lb)
A
C
A
A
B
A
a
C
B
A
EI-00058
To Next Page
Loading...
