AC-45
HVAC SYSTEM (HEATER, VENTILATOR AND A/C)
Sunload Sensor (Auto A/C Model)
20.Sunload Sensor (Auto A/C
Model)
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the sunload sensor connector.
CAUTION:
Be careful not to damage the sensors and inte-
rior trims when removing them.
B: INSTALLATION
Install in the reverse order of removal.
C: INSPECTION
<Ref. to AC-39, SUNLOAD SENSOR, Diagnostic
Procedure for Sensors.>
AC-00126
To Next Page
Loading...
