Supermicro SSE-F3548S - Page 122

Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
122
To configure multiple port channel
interfaces, use the “interface range …”
command. To provide a range, use a
hyphen (-) between the start and end
interface numbers.
E.g.: int range po 1-3
To provide multiple interfaces or
ranges, separate with a comma (,).
E.g. : int range po 1, 2
Step 3
description <string>
Optional step - adds any name string to
the port channel interfaces using the
description command.
The string may be up to 64 characters
in length.
The port channel description strings will
not affect the member ports
description strings configurations.
Step 4
mtu <framesize>
Optional step.
Configures the MTU for the port
channel interfaces.
framesize may be any number from
Port channel MTU will be used on its all
member ports.
Step 5
VLAN Configurations
Optional step – configures the VLAN