Supermicro SSE-F3548S/SSE-F3548SR Configuration User’s Guide
SMIS(config)# vlan 20
SMIS(config-vlan)# ip igmp snooping querier
SMIS(config-vlan)# exit
# Req.3 Configure IGMP v2 and fast leave for group 225.0.0.1
SMIS(config)# vlan 20
SMIS(config-vlan)# ip igmp snooping version v2
SMIS(config-vlan)# ip igmp snooping fast-leave
SMIS(config-vlan)# exit
# Req.4 Disable proxy reporting
SMIS(config)# no ip igmp snooping proxy reporting
# Req.5 Enable the switch to send general IGMP queries when spanning tree topology changes
SMIS(config)# ip igmp snooping send-query enable
# Check the running-configuration for accuracy
SMIS# show running-config
Building configuration...
ID Hardware Version Firmware OS Boot Loader0 SSE-F3548 1.0.0.0 6
0.0.0.0interface port-channel 1
exit
vlan 1
ports fx 0/11-19 untagged
ports fx 0/41-48 untagged
ports cx 0/2 untagged
exit
vlan 10
ports fx 0/20-40 untagged
ports po 1 untagged
exit
vlan 20