Supermicro SSE-F3548S - Page 350

350 |341
The default value for port-id-subtype is
if-name.
Note: The if-alias option can be used
only for the interfaces which havevalid
description configured.
Step 6
Exit
Exitsinterface configuration mode.
Step 7
lldp chassis-id-subtype { chassis-comp
<string(255)> | if-alias | port-comp <string(255)> |
mac-addr | nw-addr | if-name | local <string(255)>
}
(Optional)
Configures LLDPchassis IDsubtype and
chassis IDvalue.
The chassis identifier value can only be
set for the chassis-component and local
system subtypes. For all other
subtypes, the value is taken from the
system automatically.
chassis-comp - chassis component
if-alias - management interface alias
port-comp - port component
mac-addr - MAC address
nw-addr - network address
if-name - interface name
local - locally assigned
The default value for chassi-id-subtype
is mac-addr.
Note: To use the if-alias option, the
management interface must have
been configured with valid
description.
Step 8
End
Exits the configuration mode.
Step 9
show lldp interface [<interface-type><interface-
id>]
show lldp neighbors [chassis-id <string(255)> port-
id <string(255)>] [<interface-type><interface-
id>][detail]
show lldp traffic [<iftype><ifnum>]
Displays LLDP configuration details on a
particular interface or all interfaces
Displays information about neighbors
learned on an interface or all
interfaces
Displays LLDP counters, including the
number of frames sent, received,
discarded, etc.