Svantek SVAN 977A - Page 15

15
SVAN 977A User Manual
(<Menu>)
This key (<Shift> + <ENTER>) opens the main Menu. Double press of the <Menu> key
opens the list containing last opened positions. It gives faster access to the frequently
used screens for easy navigation.
[<Save>]
This key (<Alt> + <ENTER>) enables saving of measurement results (see description
in Chapter 3.5).
<ESC>
This key escapes from the lists of parameters, menu lists or other screens and return to
the previous screen without saving changes. It acts in an opposite way to the <ENTER>
key.
(<Cal.>)
This key (<Shift> + <ESC>) opens the Calibration position.
[<S/P>]
This key (<Alt> + <ESC>) breaks the measurement process temporary or enables
saving of the setup file if the instrument is not running the measurement.
◄, ►
These keys allow to:
• select a column in a multi column parameter list;
• select a parameter value in an active position (e.g. filter Z, A, B etc., Start Delay
period: 1s, 2s, 3s, … etc.);
• control a cursor in the Spectrum, Logger and Statistics mode of result presentation;
• select a position of the character in the text editing screen;
• activate/deactivate markers no. 2 and 3
• speed up change numerical values of parameters when pressed and held.
(◄, ►)
The ◄ / ► keys pressed together with <Shift> allow to:
• change a parameter’s value with double step (e.g. Start Delay period: form 1s to
11s, 21s, … etc.);
• shift cursor from the first to the last position and back on the plot.
[◄, ►]
The ◄ / ► keys pressed together with <Alt> allow to:
• select a parameter’s value in an active position in the matrix parameter list;
• select a parameter’s value in an active position (e.g. filter Z, A, B or C, Start Delay
period: 1s, 2s, 3s … etc.);
• insert or delete a character in the text edition screen.
▲, ▼
These keys allow to:
• select a position in the list;
• select an active field in the result view screen;
• select a character in the text edition screen;
• activate/deactivate markers no. 1 and 4.
(▲,▼)
The ▲ / ▼ keys pressed together with <Shift> allow to:
• shift a cursor from the first to the last position and back in the menu list;
• change relationship between the Y-axis and X-axis for plots.
[▲,▼]
The ▲ / ▼ keys pressed together with <Alt> allow to:
• change a mode of result presentation;
• programme the Real-Time Clock (RTC) and Timer.
<Markers>
The <Markers> key (<Alt> + <Shift>) enables marking the special events, occurring
during a measurement (for example, some sound or vibration disturbance). To activate
markers, the logger should be switched on (path: <Menu> / Measurement / Logging /
Logger Setup) and one or more logger results (Peak, Max, Min, Leq, LXY, LR1 or LR2
for sound measurements and Peak, P–P, Max or RMS for Vibration measurements) in
profiles should be active (path: <Menu> / Measurement / Logging / Logger Results).