Svantek SVAN 977A - Page 179

179
SVAN 977A User Manual - Appendixes
Word
number
Name
Comment
6
AlarmLevel
in case of DIGITAL OUT and ALARM PULSE:
level (*10 dB)
in other cases:
reserved
7
Polarisation/Slope
in case of DIGITAL OUT and TRIG. PULSE:
Polarisation:
0 – POSITIVE,
1 – NEGATIVE
in case of DIGITAL IN:
Slope:
0 – POSITIVE,
1 – NEGATIVE
in other cases:
reserved
…
Table B.1.12 Special settings for profiles in the case of SLM mode
Word
number
Name
Comment
0
0xnn05
[05 = id, nn = block’s length]
1
0x0307
[used_profile, profile’s mask]
2
0xmm06
[06 = id, mm = sub-block’s length]
3
DetectorP[1]
detector type in the 1
st
profile:
0 – IMPULSE,
1 – FAST,
2 – SLOW
4
FilterP[1]
filter type in the 1
st
profile:
1 – Z,
2 – A,
3 – C,
5 – B
5
BufferP[1]
logger contents in the 1
st
profile defined as a sum of:
0 – none,
1 – Peak,
2 – Max,
4 – Min,
8 – Leq,
16 – LR1,
32 – LR2
6
reserved
7
ProfileFlags[1]
flags in the 1
st
profile
8
0xmm06
[06 = id, mm = sub-block’s length]
9
DetectorP[2]
detector type in the 2
nd
profile:
0 – IMPULSE,
1 – FAST,
2 – SLOW