Matrix of parameters
When the list of parameters consists of more than one column you may change:
• column with the ◄ / ► key
• line in the same column with the ▲ / ▼ key
• value in a selected position with the ◄ / ► and <Alt> keys
• all values in the same column with the ▲ / ▼ and <Shift> keys
• all values in the same line with the ◄ / ► and <Shift> keys.
Complex parameters
For complex parameters, consisting of more than
one value field like Start Hour or Start Date, you
should first select the field and then change the value
of this field in accordance with the help information
on the bottom of the screen.
In all cases the <ENTER> key is used for confirmation of the selection in a position and for closing the opened
list of parameters. The list of parameters is closed, ignoring any changes made in it with the <ESC> key.
Information screen
Some screens inform about the state of the instrument, available memory,
standards fulfilled by the instrument, etc. To scroll through the screen, use the
▲ / ▼ key. To close such a screen, press <ENTER> or <ESC>.
Text editor screen
In the text editor screens, you may edit text
lines (file names, directory name etc.) The text
editor screen is opened with the ◄ / ► key
when the position with the text parameter is
selected.
These screens contain help information to
guide on how to edit the text.
The edited text is displayed in the upper line
and the character, which is displayed inversely
may be changed, deleted or a space may be
inserted before it.
• You can select the position of the character
in the edited text with the ◄ / ► key.
• You can insert or delete the position in the
edited text with the ◄ / ► key pressed
together with <Alt>.
To Next Page
Loading...
