SYNAPTICON SOMANET Circulo 7 - Page 1027

Figure 6: Choose the configuration file to be uploaded to the slave
4. Change the name to “config.csv” and click “OK” , as shown in Figure 7.
Figure 7: Edit FOE name
5. A progress bar can be seen at the bottom of the page in TwinCAT 3 after the FOE operation (see Figure 8)
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.19.0 | Built 2022-02-01 1027/1031