1.5.3.3 Installation Guide
This manual will guide you through the basic steps to get your SOMANET Node 400/1000 EtherCAT running.
Attention
When dealing with electronic devices, always consider these handling instructions!
Important
For proper functionality of the current sensors the servo drive must not be exposed to external
magnetic fields, see our mounting instructions for details.
Wiring instructions
Connector pinouts
Grounding and connecting a brake
Mounting instructions
LED signals
After you have succussfully set up your servo drive you can proceed to commission and tune your drive:
Commissioning and tuning with OBLAC Drives
1.5.3.3.1 Downloads
DOWNLOAD STEP MODEL
To Next Page
Loading...
