1.2.2.3.2.4.1 Magnetic ring distance checker
This feature can assist during the prototyping phase of the design. It computes the air gap based on the
ring’s magnetic field strength and recommends next action.
Starting from OBLAC Drives v21.3.0 there are 2 supported revisions of magnetic rings:
Ring type Characteristic SKU number
Revision 1 Don’t have any marks on it. ACC-002X-01
Revision 2 Printed text on the outer diameter that includes:
production week and year,
SKU number.
Can have some text on top of the rubber material.
ACC-002X-02
Note
Make sure you are always using the latest version of OBLAC Drives.
Please select the correct ting type in order to get more accurate air gap estimation: Marked or Unmarked.
To Next Page
Loading...
