SYNAPTICON SOMANET Circulo 7 - Page 333

6 TX_N
7 TX_P
8 FE
Important
Please note that Safety GND is an isolated signal from drive GND.
Attention
When not using the STO-SBC feature, please attach a +24 V supply to Pin 1 and 2 and Ground to Pin 3.
It’s possible to daisy-chain these signals to other servo drives.
Circulo 7
Circulo 9
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.19.0 | Built 2022-02-01 333/1031