3.1.8.3.10.4.2 Usage
In object 0x2027, the expected update rate and/or desired smoothing can be configured:
Subitem 1 switches the feature on (1) or off (0)
Subitem 2 selects the order of the filter
The Order is allowed between 0 (no action) and 31. The filter is enabled by default with an order of 3.
The order reflects the amount of steps the algorithm “looks back”.
3.1.8.3.10.4.3 Parameters
0x2027 Control input FIR filter Parameters needed for Finite impulse response Filter.
To Next Page
Loading...
