TAJIMA TWMX-C - Page 124

To adjust finishing of embroidering
110
Chapter 5
[g] Return stitches
The number of return stitches at start of sewing
The more return stitches are, the less mis-stitching at start decreases.
[h] Stitch length of return stitch after start of sewing
[i] Tie stitch length at thread trimming
7-4-2. How to operate
The following is an example that the needle bar No. is set to "3", the maximum speed is set to "950", and the
upper thread breakage detecting sensitivity is set to "3".
(1) Set to main screen.
(2) To press F1 key while pressing SET
(3) To press F1 key
(4) To select the needle bar No.
Triangle
1
2
3
T0:
One reciprocation
1 2
1:
Triangle + one
reciprocation
1
3
4 5
2
T1:
Two reciprocations
1 2
3 4
2:
Triangle + two
reciprocations
1
3
4 5
2
6 7
T2:
Without Return Stitches
Stitch at start of sewin
NO:
6(76(7
)
1 Password (Functional Limit)
)
3 Setting in units of Needle bar
6(76(7