TAJIMA TWMX-C - To Change Thread Tension (Frame Start Timing)

To adjust finishing of embroidering
113
Chapter 5
1
2
3
4
5
6
7
8
9
10
11
7-6. To change thread tension (Frame Start Timing)
7-6-1. Screen
7-6-2. How to operate
The following is an example that Frame Start Timing is set to "270".
(1) Set to main screen.
(2) Press F2 key while pressing SET key.
(3) Press F2 key.
(4) To select Frame Start Timing
Timing to start moving the frame (Value is of main
shaft angle)
To change this value, consult the distributor. Some operating condition could cause
occurrence of fault in thread trimming and affect sewing.
2 Frame Start Timing
280°
230
Thread tension
Loose
280
Tight
CAUTION
!
6(7
6(7
)
1 Max. Revolution Limit
)
2 Frame Start Timing
280°
270°
6(76(7