Decision of the design start position
58
Chapter 4
5-2. To lower the needle bar to adjust the frame position (Needle bar operation)
This function does not correspond to TFMX-C, TWMX-C.
5-2-1. Screen
5-2-2. How to operate
The following is an example of lowering the needle bar.
(1) To open screen
(2) To lower needle bar
Up: To raise needle bar
Down: To lower needle bar
When performing this operation, do not put your hands etc. near the needle. Moving up/
down of the needle bar could injure you.
Pressing SET key will lower the
needle bars of all heads.
10 Needle bar operation
Up
10 Needle bar operation
Up
To Next Page
Loading...