TAJIMA TWMX-C - Registration of a Design into the Machine Memory; To Use USB Memory (Data Input USB)

Registration of a design into the machine memory
41
Chapter 4
1
2
3
4
5
6
7
8
9
10
11
3. Registration of a design into the machine memory
Register designs in the machine memory by the following methods.
(1) Use USB memory
(2) Use personal computer (DG/ML by Pulse is necessary)
3-1. To use USB memory (Data Input USB)
Register designs saved in the USB memory into the machine memory. The maximum number of stitches per
design is 1,000,000 stitches.
3-1-1. Screen
[a] Folder layer
The folder in the USB memory can be read up to three levels. The total of folders and designes
that can be read per 1 layer directory is 255 designs.
[b] Folder
[c] Design
4 Data Input (USB)
A
Cap frame Border frame
T2
TCF
******
****
***
T3
TBF
******
****
***
T
DST
******
****
***
T
DST
******
****
***
[a]
[b]
[c]
Folders and designs saved in the USB
memory will be displayed. The design except
the one shown at left will be displayed
depending on a saving format of the design.
: Root folder
: Folder (First level)
: Folder (Second level)
: Folder (3rd layer directory)
G001.TCF
TAJIMA_W
14117
Total stitch number of design
ExtensionFile name
(Within 1,000,000 stitches)
The extension differs depending on the
saving format of the design.
T3: TCF
T2: TBF
T: DS T
For saving format of the design, refer to the
detail page.(→p.31)
Design name
T3
Saving format of design
(Up to 8 characters)