Registration of a design into the machine memory
42
Chapter 4
3-1-2. How to operate
The following is an example of registering a design saved in the USB memory into the machine memory.
(1) To set USB memory
(2) To open screen
(3) To select a design
The operation differs depending on the storing place of the design.
(a) Design in folder
(b) Design on screen
Pressing SET will display the folder in the
first level or design.
To return to the original level, press E
key.
Pressing i key will display the design
confirmation screen.(→p.29)
To return to the original screen, press E
key.
256MB
Pay attention to
the direction !
$
6(7
To Next Page
Loading...