How to use each part
22
Chapter 2
2-3. Emergency stop switch
The emergency stop switch is equipped as a measure for safety.
Pressing this switch will stop the machine. Since the switch is in the
locked state, release it according to the following procedure. After
releasing, the operation can be started as usual.
Specification of the
machine
Condition after stop How to release
EN-spec.
(European safety spec.)
The power will be
turned OFF.
(1) Turn the switch clockwise. (The power will be
turned ON.)
(2) Start the operation.
Excluding EN-spec., and
Japanese domestic use
The machine will
switch to the sleep
mode.
(1) Turn the switch clockwise.
(2) Press the sleep mode key.
It takes a while until the sleep mode is released.
(3) Start the operation.
To Next Page
Loading...