To trim thread
79
Chapter 5
1
2
3
4
5
6
7
8
9
10
11
2. To trim thread
2-1. To trim thread manually (Manual Thread Trimming)
2-1-1. Screen
2-1-2. How to operate
The following is an example of executing thread trimming.
(1) To open screen
(2) To execute thread trimming
: To trim thread
Under thread: To trim under thread only
(Excluding TFMX-C, TWMX-C)
When performing this operation, do not put your hands etc. near the needle. Moving up/
down of the needle bar could injure you.
Pressing SET key will move the
needle bar up/down and trim thread.
If turning the jog dial while pressing
“SET” with is indicated, “Under
thread” will be displayed.
'
To Next Page
Loading...