TAJIMA TWMX-C - Check Items before Embroidering; Maximum Speed (Maximum RPM)

Check items before embroidering
64
Chapter 4
6. Check items before embroidering
6-1. Maximum speed (Maximum RPM)
The value set here will be the maximum speed of the machine. It is automatically increased/decreased
depending on stitch length in the middle of embroidery.
6-1-1. Screen
6-1-2. How to operate
The following is an example when setting the maximum speed to "950".
(1) To open screen
Stitch length Embroidery speed
Up to 4.0 mm
Maximum speed
(A in the right figure)
4.1 mm to 11.9 mm
Automatic change
(B in the right figure)
12.0 mm or more Low speed (C in the right figure)
Maximum speed
1000
Speed display column
During stop: The maximum speed is displayed.
During operation: Actual operating speed is
displayed.
rpm
4.0
A
12.0
B
C
(mm)
0
1 Maximum RPM
900 rpm
&
1 Maximum RPM
900 rpm