TAJIMA TWMX-C - To Embroider the same Design Repeatedly; To Repeat to Horizontal and Vertical Direction (Repeat)

To embroider the same design repeatedly
100
Chapter 5
6. To embroider the same design repeatedly
6-1. To repeat to horizontal and vertical direction (Repeat)
Set this function after data set. Setting contents here will be added in a design. So, when you embroider this
design next time, setting again will be unnecessary.
6-1-1. Explanation on the screen
[a] Repeat method
The illustration below is an example that the priority embroidery direction is vertical.
[b] Number of repeats in horizontal
[c] Interval in horizontal (mm)
Trim
B
4 Repeat
[a]
[b]
[c]
[d]
[e]
[f]
[g]
[c]
[e]
1
2
3
4
5
[In case of pp]
[c]
[e]
135
24
[In case of pb]
[In case of pq]
[In case of pd]
[e]
[c]
1
2
3
4
5
[c]
[e]
12
3
4
5
Repeat direction will be decided by code.
Selecting "-" will perform embroidering at left
repeatedly.
(No display)