TAJIMA TWMX-C - Embroidery Starts; Start and Stop

Embroidery starts
68
Chapter 4
7. Embroidery starts
7-1. Start and stop
7-1-1. Start/stop switch
Target models: TFMX-C, TWMX-C, TFMX-IIC TYPE-2
(1) When starting the operation, press the start switch.
(2) To stop the machine, press the stop switch.
(3) To start slow operation, keep on pressing the start switch. Releasing it will start normal operation.
Before starting the machine, pay enough attention to the surrounding safety. Moving
needle bar and/or frame could injure you.
CAUTION
!
Start switch
Stop switch
TFMX-IIC TYPE-2
Stop switch
Start switch
TFMX-C, TWMX-C