TAJIMA TWMX-C - To Perform Power Resume When the Power Is Turned on (Power Resume with the Power-ON)

To return the frame to the original position
162
Chapter 6
3-6. To perform power resume when the power is turned ON
(Power Resume
with the power-ON)
This function does not correspond to L-spec. machine. Also, it is possible to perform setting onky when
"Frame limit setting" is set to "Yes".
This is the setting to display the message, and perform power resume when the power is turned ON.
3-6-1. Screen
3-6-2. How to operate
The following is an example of displaying the message to suggest power resume.
(1) Set to main screen.
(2) To press F1 key while pressing SET
(3) To press F1 key
(4) To display the message
Display of the message to urge power
resume
YES: To display
NO: Not to display
8 Power Resume with the power-ON
NO
6(76(7
)
1 Password (Functional Limit)
)
8 Power Resume with the power-ON
6(76(7
YES
6(76(7