TAJIMA TWMX-C - Page 175

To return the frame to the original position
161
Chapter 6
1
2
3
4
5
6
7
8
9
10
11
3-5-1. Screen
3-5-2. How to operate
The following is an example of displaying the message to suggest frame origin memory.
(1) Set to main screen.
(2) To press F1 key while pressing SET
(3) To press F1 key
(4) To display the message
Display of the message to urge frame
origin memory
YES: To display
NO: Not to display
Even if the power is turned ON again in the
middle of the embroidery at the setting of
"YES", any message will not be displayed.
7 Frame origin memory with the power-ON
NO
6(7
6(7
)
1 Password (Functional Limit)
)
7 Frame origin memory with the power-ON
6(76(7
YES
6(76(7