227
Cleaning
Chapter 10
1
2
3
4
5
6
7
8
9
10
11
QS07R
2. Cleaning
Clean each section by using a commercially available cleaning tool or brush (accessory). Using of an
Vacuum cleaner or an Air compressor will facilitate working.
Main cleaning spots are indicated by an arrow in the figure below. If dirt is highly visible at other spots
besides these spots, clean up there accordingly.
(1) ATH, rotary hook
When performing cleaning, be sure to turn off the power switch. You could be injured
seriously by being entangled in the machine.
An example when using an air compressor
Cleaning cycle: Every day
To Next Page
Loading...